How do you replace the low beam headlamp on a 1998 Chrysler Town & Country LXI Minivan?

[burgerlover]

How do you replace the low beam headlamp on a 1998 Chrysler Town & Country LXI Minivan?

[MIR AKA Lil Gangsta]

read the owners manual. go to the do it yourself section. There might be something to help you with your problem.

[coaltruck344]

1998 Chrysler Truck Town & Country Van 2WD V6-230 3.8L VIN L SMFI
Vehicle Level Lighting and Horns Headlamp Bulb Service and Repair
Service and Repair
HEADLAMP HIGH BEAM
REMOVAL


Release hood latch and open hood.
From behind radiator closure panel, disconnect wire connector from back of high headlamp bulb base.
Headlamp High Beam Bulb

Rotate headlamp bulb counterclockwise and pull bulb from back of headlamp module. INSTALLATION CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
Insert bulb into the back of the headlamp module.
Rotate headlamp bulb clockwise to engage bulb.
Connect wire connector to the low beam headlamp. Verify headlamp bulb operation
Verify headlamp alignment.
HEADLAMP LOW BEAM
REMOVAL


Release hood latch and open hood.
Remove the three headlamp mounting nuts.
Remove one attaching screw on top of the crossmember.
Headlamp Low Beam Bulb


Disconnect wire connector from the back of the low beam headlamp bulb base.
Low Beam Headlamp Retainer


Rotate headlamp bulb retainer counterclockwise and disengage retainer from headlamp.
Pull headlamp bulb from back of the headlamp module.
INSTALLATION
CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.

Place headlamp bulb into headlamp module.
Rotate headlamp bulb retainer clockwise to engage retainer.
Connect wire connector to the low beam headlamp. Verify headlamp bulb operation
Install the headlamp module.
Verify headlamp alignment.
Content provided by Yahoo Answers.